Skip to main content

Profiled Roof Tile Ventilators

A range of profiled roof tile ventilators to suit most common styles of roof tiles:

TV8 Plain Tile Ventilator

For small inter-locking clay and concentre plain tiles.

The TV8 is suitable for high and low level venting in roofs with minimum pitches of 35° (clay tiles) and 40° (concrete tiles).

Each vent has a slotted inhibitor to keep out large insects and vermin and requires a minimum batten and tile trimming during installation.

Free vent area of 6,250mm².

TV62 Profiled Tile Ventilator

Profiles to suit most common styles of interlocking profiled roof tiles:

  • TV62MEN range is suitable for Marley Mendip, Redland Grovebury and other similar profiles.
  • TV62MDA range is suitable for Marley Modern, Russell Grampian, Redland Mini Stoneworld and similar profiles.
  • TV62MLM is suitable for Marley Ludlow and similar profiles.
  • TV62FRA is suitable for Marley Double Roman, Russell Double Roman, Redland Landmark Double Roman, Sandtofy Double Roman and similar profiles.

Suitable for high or low venting in roofs with pitches of 22.5° and over and can be used to supplement and replace other ventilation such as dry ridge, abutment or eaves systems.

Also suitable for ventilation of compartmental roof spaces, such as fire walls. 

Free vent area of 15,000mm².

View product range & add to quote

Features & Benefits

  • High performance while retaining the aesthetics of roof design
  • Suitable for use with a wide range of roof tile profiles
  • Range of standard colours and profiles
  • UV stable for continuous exposure
  • Quick to install, requiring no special tools or maintenance
  • Suitable for high or low level venting

Applications

To provide inconspicuous ventilation to suit most types of roof tiles.

Suitable for high or low level venting.

Can be used for mechanical extraction or with soil pipe.

TV8 Plain Tile Ventilator

For small, non-interlocking clay and concrete plain tiles.

Suitable for high/low level venting in roofs with minimum pitches of 35° (clay tiles) and 40° (concrete tiles).

TV62 Profiled Tile Ventilator

Profiles to suit most common styles of interlocking profiled roof tiles.

Pitches of 22.5° and over.

Can be used to supplement and replace other ventilation such as dry ridge, abutment or eaves systems.

Also suitable for ventilation of compartmental roof spaces, such as fire walls.

Technical Information

How to Order

Determine the quantity required according to the use for which the ventilator is being installed.

Specify the type of tile being used and the colour required.

Installation guidance

TV8 Plain Tile Ventilator:

  • A ‘V’ shaped cut is made immediately below the batten
  • The ‘pennant’ is pulled up tightly round the batten and pinned in place

TV62 Profiled Tile Ventilator:

  • At each ventilating tile, position the underlay must be cut to form the required opening and its edge folded, and where necessary, supported to prevent water ingress
  • The vents are then laid and fixed by the roofer in place of an ordinary tile

Regulations and Standards

  • Satisfies all NHBC recommendations
  • Complies with all relevant Building Regulations and British Standards
  • Manufactured to BS EN ISO 9001 Quality Management System
  • Manufactured to BS EN ISO 14001 Environmental Management System

Material and Colour Choice

  • TV8 manufactured from PVC-u
  • TV62 manufactured from polypropylene
  • All tile styles are available in terracotta, red, sepia and anthracite
  • nbs plus
  • riba

Web Design by Bluestorm