Eaves Ventilation 3 in 1 Packs (6m)
A complete and easy to fit 3-in-1 ventilation system in one pack, suitable for new build or refurbishment projects, that provide
- 6 x 1m over fascia vent (EVP6 OF1 or EVP6-25 OF2)
- 10 x 600mm lengths of felt support (1128)
- 1 x 6m roll form eaves vent panel (300mm wide or 600mm wide dependant on insulation material thickness).
EVP6 packs provides ventilation equivalent to a continuous 10mm opening (10,000mm²) and is used to ventilate pitched roofs of 15°or more and the roof void is uninhabited loft or attic space.
EVP6-25 packs provides ventilation equivalent to a continuous 25mm opening (25,000mm²) and is used to ventilate pitched roofs of 15° or less, flat roofs or any roof where living accommodation is contained within the roof space.
View product range & add to quote
Features & Benefits
- Efficient and easy to fit
- Durable and totally resistant to decay
- Complete and convenient eaves ventilation in a single pack
Applications
- For pitched roof eaves ventilation
- On roofs with rafter spacings of between 400mm and 600mm
Technical Information
- EVP6 provides ventilation equivalent to a continuous 10mm opening (10,000mm²) and is used to ventilate pitched roofs of 15°or more and the roof void is uninhabited loft or attic space
- EVP6-25 provides ventilation equivalent to a continuous 25mm opening (25,000mm²) and is used to ventilate pitched roofs of 15° or less, flat roofs or any roof where living accommodation is contained within the roof space
Quality, regulations and standards
- Satisfies all NHBC recommendations
- Complies with all relevant Building Regulations and British Standards
- Manufactured to BS EN ISO 9001 Quality Management System
- Manufactured to BS EN ISO 14001 Environmental Management System
Material and colour choice
- Over fascia ventilators are manufactured by injection moulding in polypropylene
- Roll form eaves vent and felt support panels are produced by vacuum forming in UPVC
- Available in black only
How to order
- Measure the overall length of the eaves to be ventilated and divide by 6m to determine the number of packs required
Installation advice
Roll form eaves ventilator
- Unroll the ventilator along the rafters along the full length of the eaves and both sides of the building to create a cross flow ventilation action
- Position centrally above the wall plate
- This is the narrowest part of the roof where insulation is most likely to constrict airflow
- Push the corrugations down over the top of the rafters and secure using clout nails or staples
Over fascia vents - (OF1 or OF2)
- Fix ventilators to the top of the fascia board using screws or nails through the fixing holes provided
- Ventilation must be provided for the full length of the eaves along both sides of the building to create a cross flow ventilation action
Felt support panels 1128
- Fit directly on top of the over fascia vent
- Secure with clout nails driven into the top of the fascia board through the slots in the over fascia vent
- Ensure each panel is allowed to overlap the next
- Allow the rear of the panel to lay back on the rafters