Skip to main content

Dry Fix Verge System for Profiled Roof Tiles

The Dry Fix Verge System by Timloc is a robust, premium and weather resistant verge system alternative to traditional wet mortar bedding.

Our Dry fix verge system is simple and quick to fit and has been designed to be strong, but flexible for easy flexing and sliding along roof tiles.

Timloc’s dry fix verge system has been independently tested to meet all BS 8612 requirements. Performance data for this product is available upon request.

For more information call 01405 765567 Free next day delivery *

View product range & add to quote

Features & Benefits

  • Long lasting, reliable and virtually maintenance free
  • Protects against wind uplift, water ingress and general deterioration
  • Easy, fast, clean and generally safer mortar free installation
  • Allows virtually all weather installation
  • Extended slotted fixing locator flexibility
  • Simple and quick '1st piece' eaves closer installation
  • Strong but supple for easy flexing and sliding along the tiles
  • Secure fit around the tile reassurance
  • Rebated eaves closer/closure design allows for guttering
  • Maintains consistently smart appearance
  • Not impacted by building settlement
  • Helps prevent entry of large insects, birds and vermin into the roofline
  • Meets mechanical fix legislation requirements

The system also offers a unique steel fixing bracket option that presents flexible fixing points for use with alternative size counter battens or straight onto tile batten ends. The bracket avoids the reliance of end grain fixing, which can cause splitting and consequential damp penetration issues


  • Large format, interlocking concrete and clay profiled tiles
  • Batten gauges between 260-345mm
  • Most pitched roof types from 15-55°
  • Verges with or without bargeboards
  • New build and refurbishment projects

Technical Information

  • Helping to meet BS5534 code of practice for slating and tiling
  • Complies with all other relevant regulations and standards
  • Manufactured under BS EN ISO 9001 quality management system and BS EN ISO 14001 environmental management system

Material and colour choice

  • UV protected and colour mineral filled polymer verge, ridge and eaves closer components
  • Galvanised steel batten end bracket (optional)
  • Stainless steel fixing screws (supplied with ridge apex pieces/caps)
  • Galvanised steel fixing nails (supplied with eaves closer/closure packs)
  • Available in grey, terracotta, brown and black.

Products in the system

  • Verge unit - right hand
  • Verge unit - left hand
  • Eaves closer/closure pack - right and left handed units supplied with nails
  • Half round ridge (apex) piece supplied with fixing screws
  • Angled ridge (apex) piece supplied with fixing screws
  • Batten end grain fixing bracket (optional)

How to order

  • Select the relevant verge system colour for the project
  • 1 verge piece is required for each roof tile in the sloping run
  • Verge pieces are handed to suit left and right handed slopes
  • Select the ridge apex piece/cap shape - angled or round (usually to suit the project's ridge tiles)
  • An eaves closer must be installed at the beginning of each sloping run of dry verge
  • 1 optional end grain batten bracket is required for each verge piece installed in the sloping run
  • Also available in convenient specific and complete system packs to suit your specific project’s requirements
  • nbs plus
  • riba

Web Design by Bluestorm