Skip to main content

Dry Fix Continuous Verge System for Slate and Flat Tiles

A continuous verge system, for slate and flat tiles, that presents a clean flush finish and an effective and virtually maintenance free alternative to wet mortar bedding.

View product range & add to quote

Features & Benefits

  • Long lasting, reliable and virtually maintenance free
  • Protects against wind uplift, water ingress and general deterioration
  • Easy, fast, clean and generally safer mortar free installation
  • Allows virtually all weather installation
  • Integral internal channel collects and discharges rainwater to the gutter
  • Dedicated profiles for new build and refurbishment applications to ensure secure fitting
  • Refurbishment profile design avoids lifting slates and battens
  • Concealed eaves closer cap allows for guttering if required
  • Secure easy push fit joint unions
  • Tough yet flexible allows easy manipulation and secure positioning
  • Maintains consistently smart appearance
  • Isn’t affected by building settlement
  • Helps prevent entry of large insects, birds and vermin into the roofline
  • Meets mechanical fix legislation requirements

Applications

  • Slate and tile thickness between 4 and 13mm
    • slate and slate effect tiles
    • interlocking plain tiles
    • flat tiles - single lap
  • Most pitched roof types from 15-55°
  • Verges with or without bargeboards
  • Most roof types and configurations
  • New build and refurbishment projects

Technical Information

  • Helping to meet BS 5534 Code of practice for slating and tiling
  • Complies with all other relevant regulations and standards
  • Manufactured to BS EN ISO 9001 and BS EN ISO 14001

Material and colour choice

  • UV protected and colour fast PVC verge and polypropylene ridge and eaves closer caps
  • Stainless steel fixing screws supplied with ridge cap/apex piece
  • Supplied in dark grey only

How to order

  • Measure the length of the roof slope in metres and divide by 3 (product length) to identify how many profiles are required
  • Ensure that the correct profile type is ordered for the project - new build or refurbishment
  • An eaves closer cap must be installed at the beginning of each sloping run of Dry Fix Continuous Verge
  • A Dry Fix Continuous Verge angled ridge piece must be installed at the apex of gable roofs
  • A joint union is required when joining two Dry Fix Continuous Verge profiles together

Products in the system

  • 3m dry fix continuous verge for new build
  • 3m dry fix continuous verge for refurbishment
  • Angled ridge (apex) piece supplied with fixing screws
  • Eaves closer cap pack (right and left handed units)
  • Joint union (connects two verge sections together)
  • nbs plus
  • riba

Web Design by Bluestorm