Skip to main content

Accessories

Installation Advice

  • Product 1203 should be fitted with the slotted end to accept the airbrick, 1203 sleeves can also be slotted together to form longer sections if required
  • Product 1204 fits externally over the upper and lower parts of the ventilator, units can be multi stacked for greater height
  • Product 1205 has a 'push-fit' opening for the drainage pipe, the vermin grille of the ventilator can be left in position. For fitting to a drainage pipe coupling will be required
  • Product 1206 fits over the lower rear opening of the ventilator. The vermin grille must first be removed to allow this, and then replaced at the other end of the extension sleeve. 1206 sleeves can also be slotted together to form longer sections if required
  • To improve joins between the telescopic underfloor ventilator and an accessory, seal using insulating or duct tape
  • nbs plus
  • riba

Web Design by Bluestorm