Skip to main content

Aero Wall Anti Draught Ventilator

Installation Advice

  • Anti-draught ventilators can be installed in new and existing walls
  • To fit into an existing build, stitch drill and remove brickwork to one brick wide x either one or two brick high, and fit sloping away from the inner wall
  • Large flanges around the external cowl and internal grille allow for minor irregularities to be covered easily and also adequate fixing
  • An external cowl will push onto sleeve and can be silicone sealed to face or screw fixed.
  • nbs plus
  • riba

Web Design by Bluestorm