Skip to main content

Timloc Lintel Stopends

Installation Advice

  • Use wherever water could collect on an external lintel, they are designed to prevent water running off the ends of the lintel and back into the cavity
  • To work effectively, lintel stopends should be placed directly on top of the front flange of the lintel, or over-lintel DPC and as close to the ends as the brick bonding will allow
  • The area on the lintel where the lintel stopends are placed must be clean and dry, otherwise, the pre-applied butyl mastic tape will not seal correctly
  • nbs plus
  • riba

Web Design by Bluestorm