• Home »
• Knowledge Bank »
• Installation Instructions »
• Cavity trays »
• Timloc Insualtion Retaining Discs

Timloc Insualtion Retaining Discs

• Insulation retaining discs should be fitted to every wall tie in applications where insulation retainers are required
• Spacing and quantity calculations should be as wall tie guidance
• Consult the latest NHBC Standards for required spacing
• 'Where partical cavity fill is to be used', ties/discs should be spaced at 600mm centres horizontally and in vertical as well as horizontal rows, i.e. not staggered
• Retaining discs are clipped onto wall ties either before building-in or in situ
• Due to the firm grip design, the disc may require opening slightly to accept the wall tie
• It is recommended that the wall tie is held in position when the disc is offered and clipped into place