Plastic Access Panels
Installation Advice
- Cut the hole to size, making sure that it is straight and level
- Apply silicon or another suitable building grade adhesive to the back of the frame
- Check which way you want the door to hinge
- Press the panel firmly into place, checking that it is straight and level
- Do not operate until adhesive has set completely
- To open the door, use a screwdriver in the slot and lever up
- To remove the door, open the door slightly and pull the door away from the hinge position, whilst maintaining the door at a slight angle. This does not apply to AP110 which is clip fit
- To replace the door, reverse the removal process