Skip to main content

Airtight Access Panels

Installation Advice

  • Cut the hole to size, making sure that it is straight and level
  • Apply silicon or another suitable building grade adhesive to the back of the frame
  • Check which way you want the door to hinge
  • Press the panel firmly into place, checking that it is straight and level
  • Do not operate until the adhesive has set completely
  • To open the door, use a screwdriver in the slot and lever up
  • To the remove door, open the door slightly and the pull door away from the hinge position, whilst maintaining the door at a slight angle. This does not apply to the AP110 which is clip fit
  • To the replace door, reverse the removal process
  • nbs plus
  • riba

Web Design by Bluestorm